Emulex Virtual Fabric Adapter (CFFh) for IBM BladeCenter - network adapter - 2 ports
Manufacturer: IBM Part number: 49Y4235
- More product information:
- User reviews
- Specifications
- Manufacturer info
- Description:
- The Emulex Virtual Fabric Adapter (CFFh) is the Multi-Function Adapter for the IBM BladeCenter. This offering allows BladeCenter integration with virtually any open-standards-based Local Area Network (LAN). The Emulex Virtual Fabric Adapter (CFFh) for IBM BladeCenter is a dual-port 10 Gb Ethernet card that supports up to eight virtual NIC devices. The virtual NICs are configured to meet the client'... Read more
Where to buy
*Total price for the Emulex Virtual Fabric Adapter are estimated and may vary slightly based on exact tax, shipping, manufacturer rebate or any sale/promotion on the merchant site.
show Specifications
- Manufacturer: IBM
- Part number: 49Y4235
- Description: The Emulex Virtual Fabric Adapter (CFFh) is the Multi-Function Adapter for the IBM BladeCenter. This offering allows BladeCenter integration with virtually any open-standards-based Local Area Network (LAN). The Emulex Virtual Fabric Adapter (CFFh) for IBM BladeCenter is a dual-port 10 Gb Ethernet card that supports up to eight virtual NIC devices. The virtual NICs are configured to meet the client's mix of network connectivity and throughput demands for today's complex server application environments. Because this adapter supports up to eight virtual NICs on a single dual-port Ethernet adapter, you see potential benefits in cost, power/cooling, and datacenter footprint by deploying less hardware. The adapter enables you to configure up to 12 NIC devices on a single blade server. This adapter is based on industry-standard PCIe architecture and offers the flexibility to operate as a Virtual NIC Fabric Adapter or as dual-port 10 Gb Ethernet device. The adapter firmware can be updated for future upgrade to FCoE and iSCSI offload for full Converged Virtual Network Adapter support. The Emulex Virtual Fabric Adapter works in conjunction with the BNT 10 Gb Ethernet HSSM for BladeCenter to provide full Layer 2 Ethernet domain and trunking support. The Emulex Virtual Fabric Adapter form factor is supported in the BC-H and BC-HT chassis with compatible high-speed modules.
General
- Packaged Quantity 1
- Device Type Network adapter - 2 ports
- Form Factor Plug-in card
- Width 0.6 in
- Depth 4.9 in
- Height 6.3 in
- Networking Device Type Network adapter 2 Free
- Interface (Bus) Type PCI Express 2.0 x8
- Form factor [Jul 2, 2008 from CDS: Networking] Plug-in card
Networking
- Data Link Protocol Gigabit Ethernet ,
10 Gigabit Ethernet - Connectivity Technology Wired
- Networking type Network adapter
- Features Jumbo Frames support,
Wake on LAN (WOL),
Full duplex capability,
Auto-negotiation,
VLAN support,
IPv4 and IPv6 Large Send Offload and Checksum Offload (LSO/TCO) Expansion / Connectivity
- Interfaces 2 x Network
- Compatible Slots 1 x PCI Express 2.0 x8
- Connections None
- Port(s) Total (Free) / Connector Type:Port(s) Total (Free) / Connector Type Port(s) Total (Free) / Connector Type 2 Network
Miscellaneous
- Compliant Standards EN55022,
GOST,
MIC,
CSA C22.2 No. 60950-1-03,
ICES-003,
FCC CFR47 Part 15 B,
C-Tick,
VCCI,
UL 60950-1,
GOST-R,
IEC 60950-1,
EN 60950-1,
CE,
BSMI Power
- Power Device None
- Power Supply / Device None
Manufacturer Warranty
- Service & Support 1 year warranty
- Service & Support Details Limited warranty - 1 year
Environmental Parameters
- Min Operating Temperature 50 °F
- Max Operating Temperature 120.2 °F
- Humidity Range Operating 8 - 80%
Expansion / Port(s) Required
- Slot(s) Required 1 PCI Express 2.0 x8
- Port(s) / Connector(s) Required None
Warranty
- Service / Support Details Limited warranty 1 year
See pricing