HP memory - 32 MB - DIMM 100-pin - SDRAM

• Manufacturer: HP
• Part number: C4143A
• Description: Newer HP LaserJet printers use DIMMS and there are two types supported - EDO DIMMS and SDRAM DIMMS. They have similar specifications and both will function in the printer. EDO technology that retains data in memory while the processor continues with other operations. This memory is single-tasking. EDO memory specifications are the following: 100 pin, 32 bit , 60ns, 3.3 volts, 1K refresh rate. SDRAM allows the processor to continue with other operations while the memory chip is retrieving data. This memory is multi-tasking. SDRAM memory specifications are the following: 100 pin, 32 bit, 66Mhz, 3.3 volts, 1K refresh rate. Both EDO and SDRAM conform to the JEDEC standard and they can be mixed within the printer. They do not need to be used in pairs. Both are unbuffered. Neither EDO nor SDRAM support error correction. EDO is typically less expensive and may be more desirable for cost-conscious individuals where SDRAM will be the memory of the future.

• General

• Packaged Quantity 1
• Storage Capacity 32 MB
• Upgrade Type System specific
• Compatibility PC
• Memory specification compliance PC66
• Memory speed 66 MHz

• Memory

• Type DRAM
• Technology SDRAM
• Form Factor DIMM 100-pin
• Memory Speed 66 MHz ( PC66 )
• Access Time 15 ns
• Data Integrity Check Non-ECC
• Features 1K refresh , Unbuffered
• Module Configuration 8 x 32
• Supply Voltage 3.3 V
• Lead Plating Gold

• Expansion / Connectivity

• Compatible Slots 1 x Memory - DIMM 100-pin

• Manufacturer Warranty

• Service & Support 1 year warranty

• Expansion / Port(s) Required

• Total slots required 1
• Required slot Memory
• Socket type DIMM 100-pin

See pricing

Manufacturer profile

Browse HP products on Shopper.com

• Manufacturer:HP
• Address:

  3000 Hanover Street, Palo Alto, CA 94304-1185

See pricing