Samsung memory - 1 GB - DIMM 168-pin - SDRAM

• Manufacturer: Samsung
• Part number: M390S2858DT1-C7A
• Description: The Samsung M390S2858DT1 is a 128M bit x 72 Synchronous Dynamic RAM high density memory module. The Samsung M390S2858DT1 consists of eighteen CMOS Stacked 128Mx4 bit Synchronous DRAMs in two TSOP-II 400mil packages, three 18-bits Drive ICs for input control signal, one PLL in 24-pin TSSOP package for clock and one 2K EEPROM in 8-in TSSOP package for Serial Presence Detect on a 168-pin glass-epoxy substrate. Two 0.22uF and one 0.0022uF decoupling capacitors are mounted on the printed circuit board in parallel for each SDRAM. The M390S2858DT1 is a Dual In-line Memory Module and is intended for mounting into 168-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. I/O transactions are possible on every clock cycle. Range of operating frequencies, programmable latencies allows the same device to be useful for a variety of high bandwidth, high performance memory system applications.

• General

• Packaged Quantity 1
• Storage Capacity 1 GB
• Upgrade Type Generic
• Compatibility PC
• Memory specification compliance PC133
• Memory speed 133 MHz
• CAS Latency CL3

• Memory

• Type DRAM
• Technology SDRAM
• Form Factor DIMM 168-pin
• Memory Speed 133 MHz ( PC133 )
• Latency Timings CL3
• Access Time 7.5 ns
• Data Integrity Check ECC
• Features Four banks , Registered,
  8K refresh
• Module Configuration 128 x 72
• Supply Voltage 3.3 V

• Expansion / Connectivity

• Compatible Slots 1 x Memory - DIMM 168-pin

• Expansion / Port(s) Required

• Total slots required 1
• Required slot Memory
• Socket type DIMM 168-pin

See pricing

Manufacturer profile

Browse Samsung products on Shopper.com

• Manufacturer:Samsung
• Address:

  105 Challenger Road, Ridgefield Park, NJ 07660

• Phone: 1-800-726-7864
• Fax: 1-973-601-6001

See pricing