Cisco Nexus 5548UP Storage Solutions Bundle - switch - 48 ports - managed - rack-mountable - with 8x Cisco MDS 9000 Family 2/4/8-Gbps Fibre Channel-Shortwave, SFP+, LC (DS-SFP-FC8G-SW)

• Manufacturer: Cisco
• Part number: N5K-C5548UPM-B-S48
• Description: Today's data centers are increasingly filled with dense rack-mount and blade servers that host powerful multicore processors. The rapid increase in in-rack computing density and the increasing use of virtualization software combine to accelerate the demand for 10 Gigabit Ethernet and consolidated I/O: applications for which the Cisco Nexus 5000 Series Switches are an excellent match. With low latency, front-to-back cooling, and rear-facing data ports, the Cisco Nexus 5000 Series is designed for a broad range of physical, virtual, storage access, and high-performance computing environments, thus giving customers the flexibility to meet and scale their data center requirements in a gradual manner and at a pace that aligns with their business objectives. The switch series, using cut-through architecture, supports line-rate 10 Gigabit Ethernet on all ports while maintaining consistently low latency independent of packet size and services enabled. It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks. These features allow the switches to support multiple traffic classes over a lossless Ethernet fabric, thus enabling consolidation of LAN, SAN, and cluster environments. Its ability to connect Fiber Channel over Ethernet (FCoE) to native Fiber Channel protects existing storage system investments while dramatically simplifying in-rack cabling. In addition to supporting standard 10 Gigabit Ethernet network interface cards (NICs) on servers, the Cisco Nexus 5000 Series integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fiber Channel host bus adapters (HBAs), making the transition to a single, unified network fabric transparent and consistent with existing practices, management software, and OS drivers. The switch series is compatible with integrated transceivers and Twinax cabling solutions that deliver cost-effective connectivity for 10 Gigabit Ethernet to servers at the rack level, eliminating the need for expensive optical transceivers. The Cisco Nexus 5000 series is designed for data center environments with cut-through technology that enables consistent low-latency Ethernet solutions, with front-to-back cooling, and with data ports in the rear, bringing switching into close proximity with servers and making cable runs short and simple. The switch series is highly serviceable, with redundant, hot-pluggable power supplies and fan modules. It uses data center-class Cisco NX-OS Software for high reliability and ease of management.

• General

• Packaged Quantity 1
• Device Type Switch - 48 ports - Yes - with 8x Cisco MDS 9000 Family 2/4/8-Gbps Fibre Channel-Shortwave, SFP+, LC (DS-SFP-FC8G-SW)
• Enclosure Type Rack-mountable - 1 nm
• Ports 48 x SFP+
• Performance Forwarding performance : 960 Gbps
• MAC Address Table Size 32K entries
• Jumbo Frame Support 9216
• Remote Management Protocol CLI,
  RMON,
  Telnet,
  SNMP 2,
  SNMP 1,
  SNMP 3,
  SSH-2
• Encryption Algorithm AES
• Authentication Method TACACS+,
  RADIUS,
  Secure Shell v.2 (SSH2),
  MS-CHAP
• Features Layer 2 switching,
  VLAN support,
  Multiple Spanning Tree Protocol (MSTP) support,
  Link Aggregation Control Protocol (LACP),
  Rapid Per-VLAN Spanning Tree Plus (PVRST+),
  ARP support,
  DHCP snooping,
  Multicast Storm Control,
  Unicast Storm Control,
  Jumbo Frames support,
  Broadcast Storm Control,
  Access Control List (ACL) support,
  Quality of Service (QoS),
  Syslog support,
  Weighted Round Robin (WRR) queuing
• Compliant Standards IEEE 802.3x,
  IEEE 802.1Q,
  IEEE 802.1w,
  IEEE 802.3,
  IEEE 802.3ae,
  IEEE 802.1D,
  IEEE 801.1p,
  IEEE 802.3ad (LACP),
  IEEE 802.1s

• Expansion / Connectivity

• Interfaces 48 x SFP+,
  1 x Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 - Management,
  1 x Console - Management
• Expansion Slot(s) 1 (total) / 0 (free) x Expansion slot

• Power

• Power Device Power supply - hot-plug / redundant - Plug-in module
• Installed Qty 2
• Power Redundancy Yes
• Power Redundancy Scheme 1+1
• Voltage Required AC 120/230 V ( 50/60 Hz )
• Power Consumption Operational 600 Watt

• Miscellaneous

• Width 17.3 in
• Depth 29.5 in
• Height 1.7 in
• Weight 35.1 lbs
• Compliant Standards CISPR 24,
  EN55022 Class A,
  CISPR 22 Class A,
  UL 60950-1 Second Edition,
  EN 61000-3-2,
  GB 4943,
  IEC 60950-1,
  EN 60950-1,
  EN55024,
  EN 61000-3-3,
  EN300-386,
  VCCI Class A ITE,
  FCC CFR47 Part 15,
  ICES-003 Class A,
  AS/NZS 60950-1,
  BSMI CNS 13438 Class A,
  RoHS,
  CAN/CSA C22.2 No. 60950-1

• Manufacturer Warranty

• Service & Support 1 year warranty
• Service & Support Details Limited warranty - Replacement - 1 year - response time: 10 days

• Environmental Parameters

• Min Operating Temperature 32 °F
• Max Operating Temperature 104 °F
• Humidity Range Operating 5 - 95% (non-condensing)
• Min Storage Temperature -40 °F
• Max Storage Temperature 158 °F

• Networking

• Networking type Switch
• Features [Jul 2, 2008 from CDS: Networking] Layer 2 switching,
  VLAN support,
  Multiple Spanning Tree Protocol (MSTP) support,
  Link Aggregation Control Protocol (LACP),
  Rapid Per-VLAN Spanning Tree Plus (PVRST+),
  ARP support,
  DHCP snooping,
  Multicast Storm Control,
  Unicast Storm Control,
  Jumbo Frames support,
  Broadcast Storm Control,
  Access Control List (ACL) support,
  Quality of Service (QoS),
  Syslog support,
  Weighted Round Robin (WRR) queuing

See pricing

Manufacturer profile

Browse Cisco products on Shopper.com

• Manufacturer:Cisco
• Address:

  170 W. Tasman Dr. San Jose, CA 95134

• Phone: 800-553-6387
• Email: tac@cisco.com

See pricing