D-Link xStack DGS-3620-28TC - switch - 24 ports - managed - desktop

• Manufacturer: D-Link
• Part number: DGS-3620-28TC/SI
• Description: The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer QoS and access control, along with redundant power solutions for SMBs and enterprises. With high Gigabit port densities, Gigabit SFP and 10-Gigabit SFP+ support, and advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone and centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) and the Enhanced Image (EI). The Standard Image provides fundamental features for campuses and enterprises such as switching, routing, multicasting, advanced Quality of Service (QoS), and robust security features. The Enhanced Image supports OAM, BGP, IPv6 dynamic routing and tunneling, which are all suitable for the service provider network. Easily deployed and simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone and centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, and the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth and high port densities on the already cost efficient DGS-3620 Series. The DGS-3620 Series provides a complete set of security features including L2/L3/L4 multi-layer Access Control Lists and 802.1x user authentication via TACACS+ and RADIUS servers. D-Link ZoneDefense technology is built-in allowing businesses to integrate the switch stack with D-Link NetDefend firewalls to implement a complete and proactive security infrastructure. The DGS-3620 Series offers extensive VLAN support including GVRP and 802.1Q VLAN to enhance security and performance. A robust set of L2/L3/L4 QoS/CoS solutions help ensure that critical network services such as VoIP and video conferencing are served with proper priority. The DGS-3620 Series provides D-Link's Safeguard Engine to increase the switch's reliability, serviceability, and availability to prevent malicious flooding traffic caused by worms/virus infections. Bandwidth Control can be flexibly set for each port using pre-defined thresholds to assure a committed level of service for end users. For advanced applications, flow-based bandwidth control allows easy fine-tuning of service types based on specific IP addresses or protocols. The DGS-3620 Series also features comprehensive IPv6 support, including IPv6 Tunneling, ICMPv6, DHCPv6, RIPng, OSPFv3, etc. With 10-Gigabit connectivity and IPv6 support, the DGS-3620 Series enables you to future-proof your network for cost efficiency and longevity while meeting the requirements for IPv6 capable network devices in the coming years. D-Link is striving to take the lead in developing innovative and power-saving technology that does not sacrifice operational performance or functionality. The DGS-3620 Series implements the D-Link Green Technology, which includes a power saving mode, smart fan, reduced heat dissipation, and cable length detection. The power saving feature automatically powers down ports that have no active link.

• General

• Packaged Quantity 1
• Device Type Switch - 24 ports - Layer 3 - Yes - Stackable
• Enclosure Type Desktop - 1 nm
• Ports 20 x 10/100/1000 + 4 x Combo Gigabit SFP + 4 x 10 Gigabit SFP+
• Performance Switching capacity : 128 Gbps,
  Forwarding performance : 95.24 Mpps
• MAC Address Table Size 32K entries
• Jumbo Frame Support 13000
• Max Units In A Stack 12
• Routing Protocol IGMPv3,
  PIM-SSM,
  Policy-based routing (PBR),
  IGMP,
  Bidirectional Forwarding Detection (BFD),
  RIP-1,
  RIP-2,
  VRRP,
  OSPFv2,
  PIM-SM,
  PIM-DM,
  OSPF,
  IGMPv2
• Remote Management Protocol CLI,
  TFTP,
  Telnet,
  RMON 1,
  SNMP 1,
  SNMP 3,
  RMON 2,
  SNMP 2c
• Encryption Algorithm SSL,
  SSL 2.0
• Authentication Method TACACS+,
  Secure Shell (SSH),
  RADIUS,
  Secure Shell v.2 (SSH2)
• Features DHCP server,
  Uni-Directional Link Detection (UDLD),
  IPv6 support,
  Full duplex capability,
  VLAN support,
  Multiple Spanning Tree Protocol (MSTP) support,
  Port mirroring,
  Remote Switch Port Analyzer (RSPAN),
  Link Aggregation Control Protocol (LACP),
  Trivial File Transfer Protocol (TFTP) support,
  IGMP snooping,
  BOOTP support,
  Flow control,
  LLDP support,
  MLD snooping,
  Trunking,
  sFlow,
  Broadcast Storm Control,
  Access Control List (ACL) support,
  Spanning Tree Protocol (STP) support,
  Rapid Spanning Tree Protocol (RSTP) support,
  Quality of Service (QoS),
  Syslog support,
  SNTP support
• Compliant Standards IEEE 802.1Q,
  IEEE 802.1w,
  IEEE 802.1p,
  IEEE 802.3ah,
  IEEE 802.3,
  IEEE 802.1x,
  IEEE 802.1D,
  IEEE 802.3ad (LACP),
  IEEE 802.1v,
  IEEE 802.1s
• RAM 256 MB

• Expansion / Connectivity

• Interfaces 24 x Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45,
  1 x Console - RJ-45 - Management,
  4 x SFP (mini-GBIC),
  4 x SFP+
• Expansion Slot(s) 1 SD Memory Card

• Power

• Power Device Power supply - Internal
• Voltage Required AC 120/230 V ( 50/60 Hz )
• Power Consumption Operational 50.8 Watt
• Features Redundant Power System (RPS) connector

• Memory

• RAM 256 MB

• Miscellaneous

• Width 17.4 in
• Depth 12.2 in
• Height 1.7 in
• Weight 9 lbs
• Compliant Standards C-Tick,
  VCCI,
  FCC Class A certified,
  cUL,
  UL,
  RoHS,
  GOST-R

• Software / System Requirements

• Software Included Standard Image (SI) Software

• Manufacturer Warranty

• Service & Support Limited lifetime warranty
• Service & Support Details Limited warranty - Lifetime

• Environmental Parameters

• Min Operating Temperature 32 °F
• Max Operating Temperature 122 °F
• Humidity Range Operating 10 - 90%
• Min Storage Temperature -40 °F
• Max Storage Temperature 158 °F
• Humidity Range Storage 5 - 90%

• Networking

• Networking type Switch
• Features [Jul 2, 2008 from CDS: Networking] DHCP server,
  Uni-Directional Link Detection (UDLD),
  IPv6 support,
  Full duplex capability,
  VLAN support,
  Multiple Spanning Tree Protocol (MSTP) support,
  Port mirroring,
  Remote Switch Port Analyzer (RSPAN),
  Link Aggregation Control Protocol (LACP),
  Trivial File Transfer Protocol (TFTP) support,
  IGMP snooping,
  BOOTP support,
  Flow control,
  LLDP support,
  MLD snooping,
  Trunking,
  sFlow,
  Broadcast Storm Control,
  Access Control List (ACL) support,
  Spanning Tree Protocol (STP) support,
  Rapid Spanning Tree Protocol (RSTP) support,
  Quality of Service (QoS),
  Syslog support,
  SNTP support

See pricing

Manufacturer profile

Browse D-Link products on Shopper.com

• Manufacturer:D-Link
• Address:

  17595 Mt. Herrmann Street, Fountain Valley, CA 92708

• Phone: 1-800-326-1688

See pricing