Brocade Mobility 6511 Wireless LAN Access Point Single Radio - wireless access point
Manufacturer: Brocade Communications Part number: BR-AP651160010US
- More product information:
- User reviews
- Specifications
- Manufacturer info
- Description:
- Conventional Access Points (APs) require careful planning, in addition to pulling cable and installing ceiling brackets. Sometimes organizations need wireless connectivity installed in minutes, not hours. The Brocade Mobility 6511 Wallplate Access Point (AP) integrates a dual-band 802.11 a/b/g/n AP and switched Fast Ethernet connectivity into a sleek design that is fast and easy to deploy ... Read more
Where to buy
*Total price for the Brocade Mobility 6511 Wireless LAN Access Point... are estimated and may vary slightly based on exact tax, shipping, manufacturer rebate or any sale/promotion on the merchant site.
show Specifications
- Manufacturer: Brocade Communications
- Part number: BR-AP651160010US
- Description: Conventional Access Points (APs) require careful planning, in addition to pulling cable and installing ceiling brackets. Sometimes organizations need wireless connectivity installed in minutes, not hours. The Brocade Mobility 6511 Wallplate Access Point (AP) integrates a dual-band 802.11 a/b/g/n AP and switched Fast Ethernet connectivity into a sleek design that is fast and easy to deploy on any wall surface or structured wiring telecom box using the existing CAT 5/6 cabling. The Brocade Mobility 6511 AP is ideal for dormitories, patient rooms, guest rooms, and other multi-dwelling units where firewalls, metal doors, mirrors, plumbing, and wall tiles obstruct hallway Wi-Fi signals. It features a snap-in port for any keystonestyle connector - such as RJ11 or TV coax - so multiple services can be supported on a single integrated AP. Guest rooms often require additional Ethernet ports for voice service, device monitoring, or even guest wireline. A snap-on three-port wired Fast Ethernet expansion module dramatically reduces deployment costs by providing multiple wired Ethernet switch ports while eliminating multiple CAT 5/6 cables to a single room. The Brocade Mobility 6511 AP provides enterprises and branch offices with key functions, including 802.1X and firewall capabilities on wireless and wired ports, intrusion prevention, fast roaming, and Quality of Service (QoS) traffic handling.
General
- Packaged Quantity 1
- Device Type Wireless access point
- Width 5 in
- Depth 2.8 in
- Height 1.1 in
- Weight 7.1 oz
- Localization United States
Networking
- Form Factor External
- Connectivity Technology Wireless
- Data Transfer Rate 600 Mbps
- Data Link Protocol IEEE 802.11a,
IEEE 802.11b,
IEEE 802.11n,
IEEE 802.11g - Spread Spectrum Method OFDM,
DSSS - Network / Transport Protocol FTP,
PPPoE - Remote Management Protocol CLI,
HTTPS,
TFTP,
SNMP 1,
SNMP 3,
HTTP,
SSH,
SNMP 2c - Frequency Band 2.4 GHz,
5 GHz - Capacity Virtual interfaces (VLANs) : 4095
- Status Indicators Error,
Power - Features DHCP server,
Firewall protection,
Intrusion Prevention System (IPS),
IP address filtering,
DHCP client,
2T2R MIMO technology,
Trivial File Transfer Protocol (TFTP) support,
DiffServ support,
ARP support,
BOOTP support,
Wi-Fi Multimedia (WMM) support,
SpectraLink Voice Priority (SVP) support,
SNMP trap,
Direct Sequence Spread Spectrum (DSSS),
NAT support,
DFS support,
LLDP support,
Quality of Service (QoS),
Wireless Intrusion Detection System (WIDS),
Management Information Base (MIB),
IPSec Virtual Private Network (VPN),
Multiple SSID support,
Firmware upgradable,
Dynamic DNS server - Encryption Algorithm 40-bit WEP,
256-bit AES,
PEAP,
TTLS,
128-bit WEP,
128-bit AES,
TKIP,
DES,
Triple DES,
AES-CCMP,
TLS - Authentication Method Active Directory,
LDAP - Compliant Standards IEEE 802.3af,
IEEE 802.11g,
IEEE 802.11k,
IEEE 802.1Q,
IEEE 802.11n,
IEEE 802.11e,
IEEE 802.1p,
IEEE 802.11d,
IEEE 802.11h,
IEEE 802.1x,
IEEE 802.11a,
IEEE 802.11i,
IEEE 802.11b,
IEEE 802.1ab (LLDP) Antenna
- Antenna Qty 2
Communications
- Type None
Expansion / Connectivity
- Interfaces 1 x Network - Ethernet 10Base-T/100Base-TX - RJ-45
Miscellaneous
- Cables Included 1 x Network cable - 2 in
- Mounting Kit Included
- Compliant Standards ICES-003 Class B,
C-Tick,
FCC,
UL 60950-1 Second Edition,
UL 2043,
EN55022,
FCC Part 15.407,
EN 300.328,
EN55024,
IC,
EN 301.893,
FCC Part 15 B,
FCC Part 15.247,
RoHS Power
- Voltage Required DC -36 -57 V
- Power Consumption Operational 5 Watt
Environmental Parameters
- Min Operating Temperature 32 °F
- Max Operating Temperature 104 °F
- Humidity Range Operating 5 - 95% (non-condensing)
See pricing